05G08L_120H
Multi-use
Temp range
+2°C ~ +8°C
Duration
120hr
Payload
8L
Payload size
205 × 205 × 195 mm
External size
445 × 430 × 465 mm
Parcel shippers
Greenie MEDI
다회용 보냉 패키지
A lineup of passive, reusable parcel shippers qualified for the chilled (+2 to +8°C), frozen (−25 to −15°C) and deep frozen (−60°C) ranges, in our own ISTA 7D/7E laboratory under summer and winter profiles. Every published number arrives with the test conditions, raw data and packing SOP behind it — and when nothing in the lineup fits your lane, we re-cut the configuration and test it again rather than push you to the nearest size.
- Temperature
- +2~+8 · −25~−15 · −60°C
- Payload
- 8L ~ 31L
- Duration
- 12hr ~ 120hr
- Qualified at
- ISTA 7D/7E
Lineup
Product specifications
Reusable parcel shippers grouped by the temperature range they are qualified for. Every configuration is re-cuttable to a customer payload.
Chilled
+2°C ~ +8°C
05G11L_24H
Multi-use
Temp range
+2°C ~ +8°C
Duration
24hr
Payload
11L
Payload size
255 × 195 × 225 mm
External size
405 × 370 × 378 mm
05G13L_48H
Multi-use
Temp range
+2°C ~ +8°C
Duration
48hr
Payload
13L
Payload size
235 × 235 × 235 mm
External size
445 × 430 × 465 mm
05G20L_12H, 36H
Multi-use
Temp range
+2°C ~ +8°C
Duration
12hr, 36hr
Payload
20L
Payload size
350 × 225 × 255 mm
External size
505 × 380 × 445 mm
505 × 405 × 405 mm
505 × 405 × 405 mm
05G31L_48H
Multi-use
Temp range
+2°C ~ +8°C
Duration
48hr
Payload
31L
Payload size
370 × 275 × 305 mm
External size
495 × 400 × 455 mm
Frozen
−25°C ~ −15°C20M08L_48H
Multi-use
Temp range
−25°C ~ −15°C
Duration
48hr
Payload
8L
Payload size
205 × 205 × 195 mm
External size
445 × 430 × 465 mm
20M08L_72H
Multi-use
Temp range
−25°C ~ −15°C
Duration
72hr
Payload
8L
Payload size
205 × 205 × 195 mm
External size
445 × 430 × 465 mm
20M13L_36H
Multi-use
Temp range
−25°C ~ −15°C
Duration
36hr
Payload
13L
Payload size
235 × 235 × 235 mm
External size
445 × 430 × 465 mm
Deep frozen
−60°C60M13L_72H
Multi-use
Temp range
−60°C
Duration
72hr
Payload
13L
Payload size
235 × 235 × 235 mm
External size
445 × 430 × 465 mm
Nothing here fits the lane?
Configurations are cut to a payload rather than picked off a shelf. Tell us the volume, the hold time and the route, and we qualify one for it.
Duration is the qualified hold time under the ISTA profile stated in each test — chilled, frozen and deep frozen alike. Payload size assumes the pack-out the test used — changing it changes the result. Test conditions and raw data are issued on request.
Monitoring
TTL Tag
A data logger that ships inside the payload and records the run. The segment LCD on the front carries the current reading, the recording state and any temperature excursion, and the START and STOP buttons open and close a run on the device itself — nothing to open at the dock.
- Segment LCD — reading, recording state and battery, always visible
- START and STOP on the front of the device
- Temperature excursion carried on the display as GOOD or BAD
- Status LED — green while the run is open, red once stopped
- Serial number barcode on the front
How it is used
- 01
Start the run
Holding START opens the run on the device — the display moves from READY to STARTED at the moment the shipment is packed, with no terminal and no pairing at the dock.
- 02
Read it at any handover
The segment LCD shows the current reading and whether the run is still going, without opening the box or pairing a device.
- 03
Stop and identify
Holding STOP closes the run and the display reads STOPPED. The serial number on the front ties that record to the device that made it.
Behind the numbers
Every number leaves the lab with its conditions attached
Chamber testing runs in our own ISTA 7D/7E laboratory — no external booking, no queue. What you receive is the file your auditor asks for, not a summary datasheet.
- 01
Test conditions
The ISTA profile the hold time was measured under — summer or winter, chamber or lane.
- 02
Raw data
The logged payload and ambient traces the number was read off, not a summary datasheet.
- 03
Packing SOP
The pack-out the test used. Change it and the qualified hold time no longer applies.
Markets
Where these shippers are used
Clinical trial shipments
Small payloads on long, multi-leg lanes where a single temperature excursion costs a patient visit.
Commercial distribution
Repeat lanes where recovering and re-using the shipper changes the per-shipment cost.
Cell and gene therapy payloads
−25 to −60°C payloads that need a documented duration, not a best effort.
Send the payload and the lane — we will re-cut a configuration
Custom volumes, OEM programs and Korea certificate of origin are handled in-house.